[. . . ] If you cut off the mains plug, for example to fit a different type, please destroy the old plug as it would be dangerous if inserted into a live power outlet. if a fuse is fitted to the plug , remove the fuse before throwing the plug away. Carefully follow the wiring instructions supplied with a new mains plug. [. . . ] You must ensure the mains lead cannot be walked on, crushed, chafed, cut, and so on. Avoid harsh conditions such as wet or damp places, high humidity, strong vibration, extremely high or low temperatures, strong sunlight and places that are very dusty. To save power, switch off mains power or pull out the mains power plug when you are not using the equipment Don't continue to use this equipment if you have spilt liquids in it, if it is damaged in any way or if it does not work normally. WARNING: Connect headphones with the volume set low and increase it if required. Prolonged listening through some headphones at high volume settings can result in hearing damage. Place the equipment on a hard flat surface away from direct sunlight and heat sources, allow at least a 10cm gap all around. Don't obstruct ventilation slots, including those underneath, with soft furnishings. Overheating will shorten the life of the equipment and increase the risk of fire. Disconnect the mains supply and use only a lightly dampened soft cloth. Do not use chemical solvents or strong detergents as these may damage the cosmetic finish. Waste electrical and electronic products must not be disposed of with household waste. Please refer to the retailer from whom you purchased this item for disposal instructions. Packaging materials can be recycled using your local collection facilities. If anything goes wrong, don't try and fix it yourself, get a qualified service agent to look at it. Do not expose this equipment to dripping or splashing or place any objects filled with liquids, such as vases, on the equipment. Class 1 laser product This product contains a low power laser device. NOTES: If a disc is inserted incorrectly, dirty, damaged or not present at all, and the PLAY/PAUSE button is pressed, Error or No Disc will appear in the display. To prevent damage to the disc, never open the CD door while the disc is rotating. [. . . ] A little time spent in this way may save you the inconvenience of returning your equipment. Strange noises, does not work properly CD Disc won't play Remove batteries, pull the mains plug out for 5 minutes then re-connect and try again. If this does not work, leave the unit unplugged before seeking advice. [. . . ]